The IraqSat Knowledge Base is a respository of information
designed to assist our engineers and technically-literate customers.
The following articles contain technical data covering a wide range of
topics, from VSAT basics to tips for dealing with specific hardware. In
some cases, this information is repeated from other technical
literature. IraqSat does not guarantee that the following information
is accurate or true. Use at your own risk.
Customers who use the information within these articles to
modify their systems without approval from IraqSat violate the terms of
their warranty. Any damage caused by such actions is entirely the
responsibility of the customer. In the event that IraqSat is required
to repair said damage, the customer will be billed in full for all work
performed and equipment replaced.
Printing instructions
For best results, print all of the following articles in
landscape (wide page) mode. Printing in portrait (upright page) mode
may cut off the right edge of some text.
|
VSAT Terms and Acronyms |
| Date: |
Created 2004.12.28, last updated 2005.06.15. |
| Summary: |
Industry professionals use many technical terms and
acronyms to describe VSAT hardware and performance. See this article
for a list of the most common terms, with explanations.
|
|
DW7000
Rx/Tx Codes |
| Date: |
Created 2007.04.01. |
| Summary: |
Hughes DW7000 systems use a numbered code system to
describe the state of the transmitter and receiver functions.
Understanding these codes can help you diagnose a problem with your
VSAT. DW7000 codes use the same numbering scheme as other DirecWay
hardware, but may not use some codes and have minor differences in
debugging steps because of the different hardware.
|
|
DW6000
Rx/Tx Codes |
| Date: |
Created 2005.01.02. |
| Summary: |
Hughes DW6000 systems use a numbered code system to
describe the state of the transmitter and receiver functions.
Understanding these codes can help you diagnose a problem with your
VSAT. DW6000 codes use the same numbering scheme as other DirecWay
hardware, but may not use some codes and have minor differences in
debugging steps because of the different hardware.
|
|
DW4020
Rx/Tx Codes |
| Date: |
Created 2004.12.30, last updated 2005.01.02. |
| Summary: |
Hughes DW4020 systems use a numbered code system to
describe the state of the transmitter and receiver functions.
Understanding these codes can help you diagnose a problem with your
VSAT. DW4020 codes use the same numbering scheme as other DirecWay
hardware, but may not use some codes and have minor differences in
debugging steps because of the different hardware.
|
