rev.2008-06-15 - download the latest version of this guide at www.iraq-sat.net
Please have the following system information ready, and record it here. It will help you during troubleshooting, and will be needed if you contact tech support. This information is available from your service provider.
Site ID (ex: XXXXXX00000): __________________________ IDU/Modem Serial (ex: 00000): __________________________ Gateway IP (ex: 188.8.131.52): __________________________
Before you begin troubleshooting, please check the support section of the IraqSat web site for updated information, frequently-asked questions, and service announcements.
IraqSat: http://www.iraq-sat.netSupport: http://iraq-sat.net/support
You will need a PC running MS Windows, a copy of the iDirect iSite software, and either a network switch and network cable, or a cross-over network cable. This guide assumes you are using MS Windows XP and MS Internet Explorer 6 or higher. Other browsers and versions of Windows will also work, but may have different commands, methods, and appearance.
The latest copy of the iDirect iSite software is available in the Downloads section of the IraqSat Support site. Please make sure you are always using the most up-to-date version of the software.
Familiarity with Windows PCs and an understanding of basic concepts of IP networking is strongly advised.
Follow the following steps in order. When you contact technical support, include the results of each question, and provide as much information as possible
iDirect develops the iSite software for monitoring the iNFINITI series IDU. From iSite, you can identify most problems with the unit.
iSite can only monitor your iNFINITI series IDU when it is connected on the same LAN, with no router between the PC and IDU. To do this, connect both your PC and the the iNFINITI series IDU to an Ethernet switch with normal Ethernet network cables. Make sure to use the "LAN" port on the IDU. Alternatively, you may use a crossover network cable directly between the IDU and your PC.
You should see GREEN and AMBER link lights on the LAN port, and message in Windows that "Local Area Connection is now connected".
If no, check your network cable and your PC for hardware problems. If you cannot make a connection, go on to section 3.
Open the "Start" menu, then "Control Panel", and select "Network Connections". Right-click on "Local Area Connection" and choose "Properties". From the list, select "Internet Protocol (TCP/IP)" and click the "Properties" button. Select "Obtain an IP address automatically" and "Obtain DNS server address automatically".
Click "OK" to close all Network Properties and Control Panel windows.
Start the iSite application. You should see an information about your IDU in the left pane, entitled "iSite Tree View". This includes the model number, serial number, and IP address (Gateway IP):
If yes, you are ready to use iSite. Proceed to section 2. If no, you may need to open Windows Firewall. Go on to the next section.
The iNFINITI series IDU communicates with iSite by sending network traffic over UDP port 9001. By default, the Windows Firewall blocks this port. You must create an exception for this port.
Open Windows Firewall settings. Open the "Start" menu, then select "Control Panel". Select "Network and Internet Connections", then "Windows Firewall". The Windows Firewall settings dialog will open.
Click on the "Add Port" button. The "Add a Port" dialog opens:
In the "Name" field, enter "iSite" or a similarly description. In the "Port number" field, enter "9001", and choose "UDP". Press "OK" until this window and the main "Windows Firewall" settings dialogs are closed.
You should now be able to use iSite. Repeat from section 1.3.
If yes, you are ready to use iSite. Proceed to section 2.
If no, check your network setup in section 1.1. If you are certain your network setup is correct, go on to the next section.
Reboot the iNFINITI series and repeat from section 1.1. Some local network problems can cause the unit to lock up until next reboot.
If no, go to section 3.
Once you see information about your IDU in the left pane, entitled "iSite Tree View", you are ready to proceed.
The basic IDU status indicators show the IDU details, how long it has been online, and replicate the four LEDs found on the face of the unit.
If no, proceed to section 3.1 to learn what these lights mean. If yes, proceed to the next section.
Additional troubleshooting information is available by logging in to the IDU. Right-click on the IDU to display the main context menu. Click "Login". The Login dialog is displayed:
Verify that the IP address matches the Gateway IP. Then click "User" and enter the password, which was given to your network administrator. The default password is "iDirect".
After logging in, the information tab appears in the pane on the right. This tab shows a lot of useful technical information which technical support may require.
If you report a problem, please include the information from this pane, especially including the Transmit and Receive frequencies, BUC and LNB translation frequencies, as well as the serial number, and Gateway IP.
Other tabs show the IP Configuration, QoS (Bandwidth / Service Plan), and Geo Location of your IDU. Check to ensure the information in these tabs is correct, and be prepared to give it to technical support if asked.
The IP Stats window allows you to view the current download and upload rates of your IDU. This is an exact measure of the current data rate of your service, and is far more reliable than any other test. VSAT Internet service is different from other broadband services, meaning other tests such as the HTTP download test in section 4.1 or "Internet speedometer" sites are not a reliable measure of your network connection.
To view IP Stats, right-click on the IDU in the "iSite Tree View" pane on the left. This displays the main context menu. Select "IP Stats", then "View":
To enable the additional options and color-coded legend, click on the "View" menu at the top of the iSite window, then select both "Legend" and "Parameters". These options allow you to view data by protocol and by type of units (Bit vs. Bytes).
Note: Service is sold in kilobits/sec (kb/sec or kbit). Internet Explorer reports speeds in kilobytes/sec (kB/sec or kbyte). 1 kbyte = 8 kbits. Therefore 2048 kbit service will show download speeds no higher than 256 kbytes/sec
IraqSat iDirect service is a shared bandwidth system. Expected download rates vary with the grade of service (GOS), the time of day, and average network load. To test your current performance, observe the IP Stats window during a file upload or download, or during a time of busy usage at your site. A good download test is to use the HTTP download test in section 4.1 while observing IP Stats.
If your site is performing poorly, you may:
If you suspect a problem with your service, contact technical support and include your identifying information and the observed download and upload rates as reported in the IP Stats window.
If all tests have passed so far, try to browse the web. Using Internet Explorer, open any common site such as www.google.com or www.yahoo.com.
If no, your iNFINITI series unit is functioning correctly.
If you are still having a problem, try the performance tests in section 4 or the local network and PC tips in section 5.
The iNFINITI series IDU consists of a single component, integrating a satellite modem with a basic network router.
The iNFINITI series IDU has five multi-color LEDs on its face. From left to right, these are marked "RX", "TX", "NET", "STATUS", and "PWR".
Figure 3.1: iNFINITI series IDU status lights in normal operation
In normal operation, all five lights are solid GREEN. The lights may flash during bootup and when reconnecting to the network, and change color according to the state of the IDU. The following is a table of the possible status of these lights.
If no lights are on, there is no power to the IDU. Check the power supply to make sure it is plugged in and undamaged. If all lights are normal, go back to section 2 or section 1.
Several cables connect to the IDU in back.
IMPORTANT: Always disconnect the power to the iNFINITI series IDU before connecting or disconnecting the receive or transmit co-axial cables. Failure to do so may damage the unit and void your warranty.
If any cables or connectors are damaged, contact technical support to order replacements.
If any cables are disconnected, turn the unit off, connect them, and turn the unit back on. Then go back to section 3.1.
Check the dish for any signs of damage or misalignment. Once pointed by a professional engineer, even the slightest change to the alignment will cause the VSAT unit to stop working. Damage to the dish, support arms, ODU, or other components can prevent the VSAT from functioning. Even the slightest bending of frame parts can render the dish useless, by permanently moving the ODU out of the focal point of the dish.
If the dish has been damaged, contact technical support.
Snow, hail, heavy rain, and dust and sand storms can all cause enough interference to prevent the VSAT unit from working. If the system functions in normal weather, but is interrupted in heavy weather, it may be necessary to repoint the dish, buy a larger diameter of dish, or to simply wait for the storm to end.
Twice each year, the regular movement of the sun can cause it to disrupt communications from the satellite in orbit. These interruptions last only a few minutes and are predictable in advance. When possible, IraqSat will announce these interruptions via email or our web page
This section is for testing the performance of your iNFINITI series system. Before performing these tests, complete all previous troubleshooting steps.
This test measures the HTTP (web) download speed of your connection in kbytes/sec. This is only a simple indicator of download speed, and is not reliable as an exact measure of network performance. The most accurate measure is to use the iSite "IP Stats" Window in section 2.4 above.
Connect only one PC to the iNFINITI series as in section 1.1 above. Using Internet Explorer, run the following test.
Compare this rate to the table of expected rates in section 2.4.
Open a command prompt. Open the "Start" menu, then select "Run". Type "cmd" in the field, and hit "OK". A black command prompt window will open.
Type "ping 184.108.40.206" and hit Enter. Replace the example IP with your Gateway IP. A successful ping response looks like this:
Pinging 220.127.116.11 with 32 bytes of data: Reply from 18.104.22.168: bytes=32 time=11ms TTL=64 Reply from 22.214.171.124: bytes=32 time=3ms TTL=64 Reply from 126.96.36.199: bytes=32 time=3ms TTL=64 Reply from 188.8.131.52: bytes=32 time=3ms TTL=64
Ping statistics for 184.108.40.206: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 3ms, Maximum = 11ms, Average = 5ms
While a failure looks like this:
Pinging 220.127.116.11 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out.
Ping statistics for 18.104.22.168: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss)
If the error message displayed is "Request timed out", your IP address is not configured correctly, or there is a major configuration error with the iNFINITI series IDU. Please repeat section 1.2 and make sure you are being assigned an IP address.
If the error message displayed is "Hardware error", you did not follow all the steps in section 1.1. Go back and try again.
If the error message displayed is "Destination host unreachable", your IP settings may not be correct in section 1.2. Go back and try again.
Problems in the Network Operations Center (NOC) or their DNS servers can cause your VSAT Internet service to be interrupted. Run these ping tests to verify basic connectivity to the NOC.
Pinging 22.214.171.124 with 32 bytes of data:
Reply from 126.96.36.199: bytes=32 time=539ms TTL=62 Reply from 188.8.131.52: bytes=32 time=531ms TTL=62 Reply from 184.108.40.206: bytes=32 time=661ms TTL=62 Reply from 220.127.116.11: bytes=32 time=531ms TTL=62
Ping statistics for 18.104.22.168:Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),Approximate round trip times in milli-seconds: Minimum = 531ms,Maximum = 661ms, Average = 565ms
If the NOC ping test fails, but all of the previous tests have passed, there is a connectivity problem between your iNFINITI series unit and the NOC. Contact technical support and include the results of the ping test.
The NOC is the point where your network connects to the rest of the Internet. Once you have verified you have a connection to the NOC, check for a connection to the Internet beyond. Run the ping test again, this time to a server outside of the Talia NOC:
If the Internet ping test fails, but all of the previous tests have passed, there is a connectivity problem between the NOC and the rest of the Internet. Contact technical support and include the results of all ping tests. We will inform the NOC of the problem, and assist them to resolve it as soon as possible.
If the Internet ping test succeeds, but you still cannot browse, there may be a problem with the DNS servers. Test them using the nslookup command. DNS servers are 22.214.171.124 & 126.96.36.199 for AM22 services, and 188.8.131.52 & 184.108.40.206 for BADR-4 & NSS 703 services.
Server: ns1-bedford.talia.net Address: 220.127.116.11 Non-authoritative answer: Name: www.l.google.com Addresses: 18.104.22.168, 22.214.171.124 Aliases: www.google.com
3. Repeat this test with the DNS server on board your iNFINITI series IDU, replacing 126.96.36.199 with the DNS servers for your service. Also try your Gateway IP address (example: 188.8.131.52) in the command above.
If the DNS test fails, but all of the previous tests have passed, there may be a problem with the NOC DNS servers. Contact technical support and include the results of this test.
The Windows tool tracert shows you the path a network packet takes to reach its destination. If you cannot reach a particular site, or to identify where your traffic is stopping, use this test.
Tracing route to talia.net [184.108.40.206] Over a maximum of 30 hops:
1 5 ms 1 ms 1 ms 1-67-31-85-customer.talia.net [220.127.116.11] 2 543 ms 534 ms 546 ms pp-bedford.talia.net [18.104.22.168] 3 548 ms 543 ms 537 ms gw-bedford.talia.net [22.214.171.124] 4 544 ms 547 ms 577 ms gw2-bedford.talia.net [126.96.36.199] 5 552 ms 555 ms 597 ms 188.8.131.52 6 546 ms 549 ms 545 ms ds-0-0-0.7513.lon.khighway.net [184.108.40.206] 7 550 ms 546 ms 548 ms 220.127.116.11 8 * * * Request timed out. 9 * * * Request timed out. 10 * * * Request timed out. 11 558 ms 624 ms 576 ms 18.104.22.168 12 548 ms 559 ms 549 ms so-4-1-0.mp2.Manchesteruk1.Level3.net [22.214.171.124] 13 553 ms 561 ms 553 ms ae-1-0.bbr2.London1.Level3.net[126.96.36.199] 14 557 ms 555 ms 565 ms ge-6-0.core2.London1.Level3.net [188.8.131.52] 15 570 ms 559 ms 559 ms POS3-3.BR1.LND9.ALTER.NET [184.108.40.206] 16 559 ms 571 ms 582 ms so-0-2-0.TR2.LND9.ALTER.NET [220.127.116.11] 17 555 ms 561 ms 554 ms so-6-0-0.XR1.LND9.ALTER.NET [18.104.22.168] 18 572 ms 556 ms 562 ms POS3-0.cr1.lnd10.gbb.uk.uu.net [22.214.171.124] 19 696 ms 564 ms 560 ms pos0-0.hr1.lnd10.gbb.uk.uu.net[126.96.36.199] 20 556 ms 596 ms 609 ms ge-6-0-0.ur1.lnd10.gbb.uk.uu.net[188.8.131.52] 21 562 ms 573 ms 559 ms ge1-1.ds1.lnd10.gbb.uk.uu.net [184.108.40.206] 22 563 ms 566 ms 565 ms diba.talia.net [220.127.116.11]
In most cases, the network problem begins where the traceroute timeouts begin. However, some networks or sites - for example, hotmail.com - ignore traceroute for security reasons. If you see a series of timeouts after the traffic leaves the NOC, you may have reached your destination but the site is ignoring traceroute.
With your local network can affect your VSAT Internet connection. LAN problems are not the responsibility of your provider, and you should always eliminate this as a possible cause of your problems before contacting technical support.
All of the tests in sections 2 and 3 above are performed with a single PC connected directly to the IDU. This is done to eliminate the customer LAN from the possible causes of problems. However, the PC itself can still be the cause. Always make sure your PC's are kept up to date with Windows Update and are clear of any suspicious software or viruses that affect network performance.
A virus can slow down or halt your network and VSAT Internet connection. Further, having a virus on your network is a violation of the Terms of Service, and your service can be suspended for it. See IraqSat Support for more information on keeping your network clean of viruses, and removing infections if you already have them.
Routers, switches, servers, UPS systems, and other equipment can fail. If this equipment is critical to the function of your network, such as a router, your LAN may be cut off from your VSAT Internet connection. In such a case, the VSAT is still operating, but your users cannot tell. Always check your network equipment for problems before contacting technical support.
If one PC has no network access when another is working normally, the problem is the PC or the local network. If one PC has very slow download speeds, but others are normal, the problem is the PC or the local network. Always make certain that the problems is universal within your network before contacting technical support.
IraqSat iDirect shared service is restricted by the Terms of Service. For the latest copy of the Terms, see our website:
The most important restrictions of the Terms of Service are:
Always follow the guidelines in section 5 above, and always monitor your PCs and your customers' activity. Violation of these policies may result in a reduction in bandwidth (throttling), or deactivation of your system until the offending activity is terminated.
For exact details, download a copy of the latest Terms of Service from our website.
Before contacting support, please follow all steps in this troubleshooting guide. Support staff will require several pieces of information found in the troubleshooting process in order to help you.
If no, run the tests before contacting technical support. If yes, please include the following information when you contact support.
All IraqSat resellers and partners can log support requests via IraqSat Support. This includes direct online support via chat. Log in to see to reach us:
When requesting support, please include as much information as possible, and place your Site ID in the subject line. If you do not include enough information, we will reply and ask for it. The more information you give us, the faster we can solve your problem!
If you are unable to access IraqSat Support, please contact us by phone at (+964 790 190 8337). See the IraqSat web page for current phone numbers.
All content Copyright © IraqSat